Psyllium Fiber Powder Manufacturer for Private Label Brands

EUPHM runs four powder filling lines dedicated to fibre and botanical blends. Psyllium husk is hygroscopic and tends to clump, so we control room humidity below 45% RH and use auger fillers with servo feedback to hold fill weight within ±2% for pouches above 300 g. Typical retail formats include 150 g, 300 g, 500 g and 1 kg stand-up pouches with zipper or heat seal. Bulk orders ship in 5 kg, 10 kg or 25 kg food-grade lined bags.

The plant handles both 100% psyllium husk powder and blends with inulin, flax, chia or flavour systems. Changeover between SKUs takes 2-4 hours including full equipment washdown. For pilot runs we can produce 500–1,000 units to validate packaging and label claims before committing to a full 1,000-unit MOQ. Lead time for mass production is 20-35 working days from approved sample and deposit.

Psyllium husk powder is typically specified at 95% or 98% purity, with mesh size from 40 to 100. Finer mesh disperses more easily in water but can increase dusting during filling. We source husk from established Indian suppliers and test each lot for swelling volume, viscosity and microbial load before release. If your formula includes sweeteners, citric acid or natural flavours, we can blend to a finished powder that mixes clear or cloudy depending on your target.

For organic or non-GMO claims, we require supplier certificates and run a separate production slot to avoid cross-contact. Vegan, halal certifications are available where the ingredient supply chain supports them. We can also produce psyllium-free fibre blends using acacia, inulin or resistant dextrin if you want a lower-viscosity product. All formulation work is documented with a master batch record and a certificate of analysis per lot.

The facility is GMP-certified and operates under ISO 22000 and HACCP food safety systems. Every batch of finished psyllium powder is tested for heavy metals, pesticide residues, total plate count, yeast and mould, and E. coli. We provide a certificate of analysis, safety data sheet and allergen statement with each shipment. For US buyers, we can supply documentation for FDA prior notice; the facility is FDA-registered. For EU buyers, we support full traceability and can issue a statement of compliance with EU contaminant limits.

Shipping is arranged from Shenzhen or Hong Kong ports. Typical transit times are 18-25 days to US West Coast, 25-35 days to EU ports, and 12-18 days to Jebel Ali. We handle FOB, CIF and DDP terms. Cartons are sized for pallet efficiency, and we can apply retail-ready labels or ship unbranded for your own labelling line. Payment terms are 30% deposit, 70% against bill of lading for established accounts.

Every batch of psyllium fiber powder is tested against a locked specification before release. Identity is confirmed by FTIR and microscopic examination of husk morphology. Potency is expressed as soluble fibre content (typically 85–95% for husk powder) and viscosity (range 1,500–3,000 cP at 1% concentration). Microbial testing covers total aerobic count, yeast and mould, E. coli, Salmonella and Staphylococcus aureus. Heavy metals (lead, arsenic, cadmium, mercury) are quantified by ICP-MS. Disintegration testing applies only to capsule or tablet formats, not loose powder, and is performed on the finished dosage form where relevant.

In-process checks occur at three points: raw material receipt (100% of incoming lots sampled), blending (homogeneity verified by taking 10 random samples from the mixer), and filling (weight checks every 15 minutes, with a tolerance of ±2% for pouches and ±3% for sachets). Finished product testing is performed on a composite sample from each batch. A certificate of analysis (COA) is issued for every batch and includes test parameters, specification limits, results, and analytical methods. COAs are available in English and can be customised to include client-specific parameters such as pesticide residues or gluten content.

Retention samples are kept for every batch for a minimum of two years from the date of manufacture. For stability, we follow an accelerated protocol (40°C/75% RH for six months) and a real-time protocol (25°C/60% RH for up to 24 months) for products intended for markets with long shelf-life requirements. Stability data is used to support expiry dating, which is typically set at 24 months for psyllium powder in sealed pouches. Clients can request interim stability reports at three and six months.

Batch documentation is compiled into a batch record that includes raw material COAs, in-process records, finished product COA, and deviation reports if applicable. This documentation is retained for five years and is available for audit or regulatory submission. For private-label clients, we can provide a technical data sheet (TDS) and a specification sheet in the client's format. All testing is performed in our on-site laboratory or by accredited third-party laboratories (ISO/IEC 17025) when specific methods are required.

Psyllium fiber powder can be filled into a range of retail packaging formats. Standard options include stand-up pouches (150 g to 2 kg) with a zipper or tear notch, stick packs (3–10 g per stick), and sachets (5–30 g). Bottles (HDPE or PET) are available in 200 g to 1 kg sizes with induction seals and child-resistant closures where required. Bulk packaging is offered in 5–25 kg kraft bags with a food-grade liner or in fibre drums. We can also fill capsules (typically 500–800 mg) for supplement formats, though this page focuses on powder.

For the US market, we support FDA dietary-supplement labelling requirements, including the Supplement Facts panel, ingredient list, allergen statements, and net quantity. We can generate print-ready artwork based on client-supplied copy or provide a labelling template. Lot codes and expiry dates are applied by inkjet or laser coding on the primary package and on the carton. We recommend a format that includes the manufacturing date, expiry date, and a unique lot number that links to the batch record.

Carton specifications: standard export cartons are 5-ply corrugated with a maximum weight of 20 kg per carton. Pallets are 1,200 x 1,000 mm or 1,200 x 800 mm, stretch-wrapped and strapped, with a maximum height of 1,800 mm. For Amazon FNSKU compliance, we can apply FNSKU labels and poly-bag the units if required. We do not apply Amazon shipping labels, but we can prepare cartons according to Amazon's carton labelling and packing requirements (e.g., no mixed SKUs in a carton unless specified).

Retail-ready packaging includes optional features such as tamper-evident seals, desiccant sachets (for markets with high humidity), and a scoop inside the pouch. We can also produce display-ready cases (shelf-ready packaging) for retail chains, subject to minimum order quantities. All packaging materials are food-grade and comply with EU 10/2011 and FDA 21 CFR 175.300 where applicable. Clients are responsible for final label content approval; we provide a pre-press proof for sign-off before printing.

The minimum order quantity for psyllium fiber powder is 1,000 units per SKU for retail packaging, with lower thresholds (500–1,000 units) available for pilot runs. Sample lead time is 7–10 working days for stock specifications; custom formulations or packaging may require 15–20 working days. Mass production takes 20–35 working days after sample approval and receipt of a deposit. These timelines assume raw materials are in stock; if custom grades (e.g., organic or high-viscosity) are required, add 10–15 working days for sourcing.

Shipping options include air freight (5–10 days door-to-door) and sea freight (25–40 days port-to-port, depending on destination). For urgent orders, we can arrange air express (3–5 days) at a premium. We offer EXW, FOB (Shenzhen or Hong Kong), and DDP terms. DDP is available for the US, EU, UK, and select Middle Eastern countries; DDP pricing includes duties and taxes, but clients should confirm import restrictions for psyllium in their market. We do not handle customs clearance for DDP shipments to countries where psyllium is classified as a controlled substance.

Documentation provided with each shipment includes: commercial invoice, packing list, bill of lading or airway bill, certificate of analysis (COA), material safety data sheet (MSDS), and a free-sale certificate. For organic products, an organic certificate (e.g., USDA NOP or EU organic) is provided if the raw material is certified. A phytosanitary certificate is not typically required for processed psyllium powder, but we can arrange one if the destination country demands it. Health certificates can be issued upon request.

Payment terms are 30% deposit with the balance against a copy of the bill of lading, or a letter of credit at sight for orders above USD 50,000. We recommend booking shipping space at least two weeks before the production completion date to avoid delays. For repeat orders, we can hold stock of raw materials and packaging components to reduce lead times to 15–20 working days. All shipments are insured at the client's request; insurance is not included in the quoted freight unless specified.