Weight Management Powder Manufacturer for Custom Formulas

EUPHM operates ribbon and V-blenders with batch sizes from 50 kg to 1,200 kg. This range supports pilot runs and full-scale production without reformulation. We use metal detection and inline checkweighing on every sachet and stick pack line. Fill weight accuracy is held to +/- 2% for most powder blends. For tubs, we run auger fillers with tamper-evident seals and induction liners.

Our sachet lines handle 4-side seal and 3-side seal formats. Stick packs run at speeds up to 400 units per minute. We also fill bulk 500 g to 5 kg pouches for refill or professional channels. Changeover between SKUs takes 2-4 hours, including full allergen and colour clean-down. This keeps small-batch runs practical for brands testing multiple flavours.

Common actives include glucomannan, inulin, psyllium husk, green tea extract, L-carnitine, CLA, and whey or plant proteins. We adjust particle size to prevent segregation in multi-component blends. For fibre-heavy formulas, we add anti-caking agents such as silicon dioxide or tricalcium phosphate at 0.5-2% to maintain flow. Flavour systems cover natural, nature-identical, and masking options for bitter actives.

Sweetener selection matters for label positioning. We work with stevia, monk fruit, sucralose, and allulose. Each affects mouthfeel and dissolution time. Our lab runs bench trials to match your target viscosity and taste profile. We can also standardise protein content to 70-90% by dry weight. For vegan claims, we source pea and rice protein isolates from audited suppliers.

Every batch is tested for identity, potency, heavy metals, and microbiological limits before release. We hold GMP, ISO 22000, and HACCP certifications. Halal, and vegan certifications are available depending on your ingredient list and target market. Our facility is FDA-registered for dietary supplements. We provide certificates of analysis with each shipment.

Documentation supports US, EU, UK, and Middle East customs. We prepare technical data sheets, allergen statements, and country-of-origin declarations. For EU clients, we can align with novel food and health claim requirements at the formulation stage. Stability testing runs at 25°C/60% RH and 40°C/75% RH for 12-24 months. This helps confirm shelf life before you commit to a full production run.

Weight management powders are filled into sachets, stick packs, tubs, jars, or pouches depending on the serving size and channel. Sachets range from 5 g to 30 g and are typically used for single-serve thermogenic or fibre products. Stick packs are available in 10 g to 20 g formats with a tear notch and a hang-hole option. Tubs are offered in 250 g, 500 g, and 1,000 g sizes with a scoop and a foil or induction seal. We can also fill stand-up pouches with a zipper for 200 g to 500 g formats. All primary packaging must be food-grade and supplied with a food contact declaration.

For the US market, we build labels to the FDA dietary supplement labelling requirements: statement of identity, net quantity of contents, supplement facts panel, ingredient list, allergen declaration, and the name and place of business of the manufacturer, packer, or distributor. We do not write structure-function claims, but we format claims supplied by the brand owner and add the required disclaimer. For the EU, we follow Regulation (EU) No 1169/2011 and the nutrition and health claims regulation. Lot numbers and expiry dates are inkjet-printed on the primary pack and the carton, with a format agreed at artwork approval.

Cartons are specified to withstand export handling. A typical shipper holds 12 to 24 tubs or 50 to 100 sachets, with a gross weight under 20 kg. Palletisation is standard 1,200 mm × 1,000 mm or 1,200 mm × 800 mm, stretch-wrapped and corner-protected, with a maximum height of 1.8 m for sea freight. We can print Amazon FNSKU barcodes, polybag units, and apply retail-ready carton labels. For Amazon FBA, we follow the preparation requirements for polybagging, suffocation warning labels, and expiration date labelling in the required format.

Artwork proofing is done in-house with a pre-press check for barcode scannability, font size, and mandatory text. We provide a digital proof and a physical proof before mass production. Packaging components are ordered against the approved artwork, and any change after that point may incur a new plate or die cost. For retail listings, we can supply product images and a specification sheet on request.

Sampling starts with a formula brief and a target specification. We provide a quotation within two working days and a sample within 7-10 working days after the brief is confirmed and raw materials are in stock. Sample costs are credited against the first mass production order. If a new raw material must be sourced, add 5-7 working days. Sample approval is documented with a signed sample approval form that references the formula version and the packaging specification.

Mass production runs 20-35 working days after sample approval and receipt of the deposit. The lower end applies to standard blends with stock packaging; the upper end applies to new packaging, custom printed tubs, or multi-component blends that require additional blending and cleaning time. We provide a production schedule at order confirmation and a weekly status update. For repeat orders, lead time can shorten to 15-20 working days if raw materials and packaging are held.

Shipping is arranged by air or sea depending on volume and urgency. Air freight is typically 5-7 days door to door for 100-500 kg, while sea freight is 25-35 days port to port for full containers. We quote EXW, FOB Shenzhen or Hong Kong, and DDP for selected destinations. DDP pricing includes duties and customs clearance but excludes any destination taxes. We provide a commercial invoice, packing list, bill of lading or airway bill, certificate of analysis, material safety data sheet (MSDS) where applicable, and a free-sale certificate for markets that require it. Phytosanitary certificates are provided for botanical ingredients where the destination country requires them.

For delivery, we recommend booking space at least two weeks before the planned shipment date. We can consolidate multiple SKUs into one container and provide photos of the pallets before loading. Shipping documents are sent by courier and email within three working days of departure. Any shortfall or damage in transit is handled through the freight forwarder, and we provide replacement units at cost if the issue is traced to packing.